SGX Series

Model: SGX Series
Voltage: 10V - 1000V
Power: 5kW - 30kW
Overview: High Power Modular DC Power Supplies
  • Overview +

    Sorensen SGX Series

    Sorensen Next Generation DC Supply

    The Sorensen SGX Series represents the next generation of high power programmable DC power supplies. The SGX Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20 V output in a 3U package the SGX leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

    At the heart of the SGX series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power.

    Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system current.

    Advanced Intelligent Control

    The SGX Series is operated from the intuitive, easy-to-use front panel touch screen display. Quickly access output programming parameters, measurements, sequencing, configuration and system settings from the touch screen interface. Functions and parameters can be directly selected from the touch screen or by using the encoder selector button. The control resolution is adjusted by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range.

    Additionally, the instrument can be controlled via LXI Ethernet and RS232 standard control interfaces, as well as through the optional GPIB control interface

    SGX / SGI Comparison Chart
    Feature SGX SGI
    Modular Design
    Fast Load Transient
    Analog & Digital Summing
    Direct Front Panel V/1 Control
    Touch Screen  
    Save / Recall Setups
    System Power Readouts
    Constant Power Mode
    RS-232C Standard Standard
    LXI Class C Ethernet Standard Optional
    GPIB Optional Optional
    Burn-In Compliance Testing
    Materials Research Process Control
    Product Validation Automotive Electronics
    Rackmount ATE Systems Battery Charging
    See the SFA product page for very high current slew rate and low stored energy applications.
  • Diagram +

    Sorensen SGX Series Diagram

    Diagram Formats
    PDF SGX Diagram (182KB)
  • Manuals +

  • Data Sheets +

  • Application Notes +

  • Software +

  • Get A Quote +

    Order Information
    SGX : Model Number Description

    Options and Accessories
    Input Voltage Options
    C Input Voltage 187 / 242VAC
    D Input Voltage 342 / 440VAC
    E Input Voltage 396 / 528VAC
    Remote Control Options
    0A No Options
    1A IEEE-488.2 + RS-232C (RS-232 comes standard on SGI
    1D Isolated Analog Control
    2A Combined Options 1A + 1D
    Panel Options
    S Standard
    N No Display
    Process Options
    AA No Options
    AB AB: Certificate of Calibration to ANSI / NCSL Z540-1 (includes Test Data)
    CV 400Hz AC input @ 208 VAC ( does not carry CE, CSA or UL marks ) ( 6U only ) STD on 3U
    PF Passive power factor correction to 0.9 (Only applicable to 40V, 60V to 800V. Included in 10V-30V, 50V and 1000V.)
    R Add an 'R' to the model number for RoHS compliant version. Leave blank if RoHS version is not required.
    890-453-03 Paralleling Cable (for up to 5 units, requires one cable per unit placed in parallel)
    K550212-01 3U Rack Slides (for 5kW, 10kW and 15kW models)
    K550213-01 6U Rack Slides (for 20kW, 25kW and 30kW models)
    5551082-01 Optional AC input cover kit - 3U unit only
    Contact factory for other combinations