Skip to content

XEL Series

Model: XEL Series
Voltage: 15V - 250V
Current: 0A - 6A
Power: 75W - 180W
Overview: User-friendly 90W Linear Benchtop Supply
  • Overview +

    Sorensen XEL Series
    The Sorensen XEL benchtop power supply is as easy to use as simple analog power supplies but offers the flexibility of advanced digital features. The user interface allows easy control with single-turn knobs including a fine control knob for voltage.

    This easy-to-use interface is complemented by V-Span, S-lock and Output Enable functions. V-Span allows the user to set a maximum and minimum value over which the knob control operates. This provides more precise control over the voltage as the knob operates over a narrow range as well as protecting devices under test by limiting the maximum voltage. S-Lock provides an easy method to output a regulated fixed voltage. Output Enable lets the user setup the desired voltage and current levels prior to actually turning on the output. All of these features in a laboratory bench supply are only found in the XEL series.

    The programming "P" models include LXI Class C Ethernet, USB, RS-232 and analog remote control. The option "GP" inlcudes GPIB programming plus all of the interface methods included with the "P" models described above. This remote programming capability makes the XEL-P models well suited for system or ATE integration.

    At 4.2x11.3 inches (108mm x 287mm), the XEL series occupies the least bench top space of any programmable power supply. The dual output model offers 90W per channel, also in a compact 8.4x11.3 inches (216mm x 287mm).

    The dual output XEL30-3D is two 30V/3A power supplies in one unit. All of the features of the single output version are also in the dual output. The outputs are fully independent and isolated. Plus, the outputs can be operated in 4 modes: isolated, tracking, ratio tracking and true parallel. In addition, the outputs can be enable (on/off) independently or synchronously.

    Key Features
    • Ideal for engineering lab use

    • Digital features with analog controls

    • Remote control for bench, system & ATE applications

    • "P" models have RS-232, USB & LAN (LXI compliant, class C) standard

    • S-Lock: Set and lock the voltage

    • V-Span: user-defined voltage limits

    • Small benchtop footprint
  • Specifications +

    Sorensen XEL Series : Specifications
    Output : Voltage and Current
    Output Ratings XEL 6-8 XEL 15-5 XEL30-3 XEL60-1.5 XEL30-3D XEL
    Voltage (VDC) 0-6 0-15 0-30 0-60 0-30 0-120 0-250
    Current (ADC) 0.1mA - 8A 0.1mA - 5A 0.1mA -3A 0.1mA -1.5A 0.1mA -3/6A 0.01mA -750mA 0.01mA -370mA
    Power (W) 48 75 0-90 90 90/180 90 90
    Output Performance**
    Feature XEL 6-8 XEL 15-5 XEL30-3 XEL60-1.5 XEL30-3D XEL
    Voltage Meter 4-digit meter
    Accuracy 0.1% + 10mV
    Resolution 10mV
    Current Meter 4-digit meter
    Accuracy 0.3% + 3mA 0.3% + 3mA 0.3% + 3mA 0.3% + 3mA 0.3% + 3mA* 0.3% + 0.3mA 0.3% + 0.3mA
    Resolution 1mA 1mA 1mA 1mA 1mA 0.1mA 0.1mA
    Low Current <500mA
    0.3% + 0.3mA
    Voltage Ripple 0.4 mVRMS
    Voltage Noise 2 mVpp
    Current Ripple < 0.2 mARMS (< 40 μARMS on 500 mA range)
    Load Regulation
    Voltage 0.01% + 4.5mV with remote sense up to 0.5V line drop
    Current 0.01% + 500μA (line resistance <0.5ohms with remote sense)
    Line Regulation (10% line change)
    Voltage 0.01% + 2.0mV
    Current 0.01% + 250μA
    Transient Response <50μs to within 50mV of setting (90% load change)
    AC Input 115 VAC or 100VAC or 230VAC ± 10%, 50/60Hz
    Power 280VA maximum
    Operating Temp 5-40 °C, 20-80% RH
    Storage Temp -40 to +70 °C
    Weight 9.9 lbs. / 4.5 kgs, XEL30-3D: 18.8 lbs. / 9 kgs
    Size (WxHxD) 4.2x5.2x11.3 inches / 107x131x288 mm,
    XEL30-3D: 8.4x5.2x11.3 inches / 214x131x288 mm
    * Current accuracy in parallel mode = 0.5% + 3mA
  • Data Sheets +

  • Manuals +

  • Software +

  • Drivers +

  • Get A Quote +

    Options and Accessories
    ARM-XPDG2 Rackmount Kit