Instruments

VM9000

VMIP Base Unit (holds three instruments)
- Makes a single VXIbus card slot three times more powerful than single device solutions
- Designed for high performance instrumentation
- Open-platform, allowing product design with mixed or matched instruments provided by other suppliers
- Reduces the size and cost of test and data acquisition
Keep Reading
VM1548

48-channel TTL I/O
- Six groups of 8 I/O bits each
- Up to 144 channels per single VXIbus C-size Slot
- Message or register-based data access
- ASCII, Hex, Octal, and Binary data output types
- Up to 60 V, 300 mA open-collector
- Flexible triggering and handshaking capability
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM1548C

48-channel I/O, Open Collector
- Six groups of 8 I/O bits each
- Up to 144 channels per single VXIbus C-size Slot
- Message or register-based data access
- ASCII, Hex, Octal, and Binary data output types
- Up to 60 V, 300 mA open-collector
- Flexible triggering and handshaking capability
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM1602

32-channel Time Stamp
- 32-channel Event Monitor with Time Stamp Recording
- Up to 96 Channels per VXIbus C-size slot
- Message-based control with pseudo-register data access
- 40-bit counter for high total time count
- 1 µs resolution for Precision Time Stamping
- SCPI Compatible
- VXIplug&play Drivers
Keep Reading
VM2164

32-200 MHz, 1nS Universal Counter
- 200 MHz frequency range for both A and B channel
- 1 ns time interval resolution (100 ps with averaging)
- 9-digit resolution in 1 second gate time
- Greater than 200 readings/second over the VXIbus
- Up to 32,000 on-board readings with direct register access for fast data throughput
- Part of the VMIP Family, combine with up to two other instruments on a Single C-size card (i.e. DMM/AWG)
- Built-in DVM, for simple voltage measurement
Keep Reading
VM2601

80 MSa/s 14-bit Digitizer/IF Receiver
- The industry's first differential 14-bit DSO and frequency domain digitizer
- 40 MHz bandwidth - ideal for IF and HF frequencies
- Up to 80 MSa/s sample rate with pre and post trigger capability
- 16 MSa memory standard / 32 MSa memory optional
- Software selectable low pass filter
- Automatic pulse parameter measurements
- Up to three independent channels per C-size card
- Auto re-arm capability for storing multiple waveforms with pre-trigger data
- Sleep mode reduces power consumption when not in use
- Dual channel synchronization for precise I/O sampling
Keep Reading
VM2602

40MSa/s 14-bit Digitizer/IF Receiver
- The industry's first differential 14-bit DSO and frequency domain digitizer
- 40 MHz bandwidth - ideal for IF and HF frequencies
- Up to 40 MSa/s sample rate with pre and post trigger capability
- 16 MSa memory standard / 32 MSa memory optional
- Software selectable low pass filter
- Automatic pulse parameter measurements
- Up to three independent channels per C-size card
- Auto re-arm capability for storing multiple waveforms with pre-trigger data
- Sleep mode reduces power consumption when not in use
- Dual channel synchronization for precise I/Q sampling
Keep Reading
VM2603

20MSa/s 14-bit Digitizer/IF Receiver
- The industry's first differential 14-bit DSO and frequency domain digitizer
- 20 MHz bandwidth - ideal for IF and HF frequencies
- Up to 20 MSa/s sample rate with pre and post trigger capability
- 16 MSa memory standard / 32 MSa memory optional
- Software selectable low pass filter
- Automatic pulse parameter measurements
- Up to three independent channels per C-size card
- Auto re-arm capability for storing multiple waveforms with pre-trigger data
- Sleep mode reduces power consumption when not in use
- Dual channel synchronization for precise I/Q sampling
Keep Reading
VM2608

8-channel, 16-bit Digitizer Module
- 8 independent 16-bit A/D converters per instrument
- Each channel has its own instrumentation amplifier for a true differential input
- Flexible triggering capability
- ±0.1 to ±40 V input ranges and up to 100 kHz sampling rate per channel
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM2616

16-channel, 16-bit Digitizer Module
- 16 independent 16-bit A/D converters per instrument
- Each channel has its own instrumentation amplifier for a true differential input
- Up to 48 A/D converters per VXIbus C-size slot
- Flexible triggering capability
- ±0.1 to ±40 V input ranges and up to 100 kHz sampling rate per channel
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM2710A

6.5 digit DMM
- Auto-ranging 6.5 digit DMM
- DCV, ACV, DCI, ACI, 2- and 4-wire ohms
- Up to 2000 readings/sec over the backplane
- FIFO Memory for continuous measurements
- Two balanced differential isolated inputs
- Up to 256,000 readings of on-board memory
- Message or register data access
- Min/max, limit features, math (y=mX+b)
- High common mode rejection
- VXIplug&play drivers
Keep Reading
VM2716A

16-channel Differential 4.5 Digit Scanning Voltmeter
- Up to 48 channels per single VXIbus C-size slot
- Message or register-based data access
- Inputs can be scanned at a rate of 1000 channels per second
- 8000 readings on-board memory
- Flexible triggering
- 0.015% accuracy
- ±0.2V, ±2.0 and ±20V differential input ranges
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM3608A

8-channel, 16-bit DAC/ Waveform Generator
- 8 independent 16-bit D/A converters per instrument for high speed signal generation
- Up to 100 kSa/s Arbitrary Waveform Generation with internal programmable clock
- ±20V and ±10V output ranges
- FIFO mode allows high-speed uninterrupted data output
- Data storage and scan lists speed testing
- Extensive triggering capability
- SCPI compatible
- VXIplug&play Drivers
Keep Reading
VM3616A

16-channel, 16-bit DAC/Waveform Generator
- 16 independent 16-bit D/A converters per instrument for high speed signal generation
- Up to 48 D/A converters per VXIbus C-Size slot
- ±20V and ±10V output ranges
- Up to 100 kSa/s Arbitrary Waveform Generation with internal programmable clock
- FIFO mode allows high-speed uninterrupted data output
- Data storage and scan lists speed testing
- Extensive triggering capability
- SCPI compatible
- VXIplu&play drivers
Keep Reading
VM3618

8-channel Isolated 16-bit D/A
- 8 independently isolated 16-bit D/A converters per instrument
- 5 output ranges: ± 10V, ± 16V, 0-20V, 0-32V and ± 20mA
- >100 kSa/s using direct register access mode
- Up to 24 isolated D/A converters per single VXIbus C-size slot
- Extensive triggering capability
- Simplified testing with scan lists that can store predefined sequence of values
- On-board storage of calibration constants
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM3640A

50 MSa/s Arbitrary Waveform Generator w/Power Down Feature
- Up to 50 MSa/s sampling with 12-bit resolution
- Programmable output filters
- Designed for multi-channel applications
- Up to three independent channels per C-size card
- SCPI and VXIplug&play compatible
- Built-in functions: Sine, Square, Ramp, Triangle, Noise waveforms, Cardiac, plus more
- External modulation (Amplitude, FSK, PSK)
- Sleep mode for portable applications
Keep Reading
VM4016

16-channel Analog Comparator and Interrupt Generator
- Up to 48 differential channels per single VXIbus C-size slot
- Message or register-based data access
- Inputs can be masked, inverted and combined to produce interrupts
- Programmable debounce circuitry prevents erroneous readings
- ±10 V and ±100 V input ranges
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM4018

16-channel Precision Analog Comparator and Interrupt Generator
- Up to 48 differential channels per single VXIbus C-size slot
- Message or register-based data access
- Inputs can be masked, inverted and combined produce interrupts
- Programmable debounce circuitry prevents erroneous readings
- ±1.0V, ±2.5V, ±10.0V, ±25.0V, ±100.0V and ±250.0V input ranges
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM6068

4-channel, High-performance Serial Interface, 4MB RAM
- Four independent channels per VM6068 (up to 12 per C-size card)
- 5M baud data rates
- Software programmable interface standards: RS-232, RS-422, RS-449, RS-485, V.35 & EIA-530
- Up to 4Mbytes of buffer per four channels
- Supports UART and HDLC/SDLC protocols
- SCPI Compatible
- VXIplug&play Drivers
Keep Reading
VM7004

4-channel Programmable Resistor
- Up to 12 channels per single VXIbus C-size slot
- Message or register-based control
- Several resistance ranges from 0 ohm to 16M ohm
- On-board scan lists and triggering
- Four modes of operation
- Ideal for RTD or other sensor simulation
- SCPI compatible
- VXIplug&play drivers
Keep Reading
VM7510

DC Reference Standard
- Precision DC reference facilitates digitizer calibration
- On-board programmable switch reduces need for external system cabling
- Simplified programming using word-serial commands
- Programmable polarity for dc reference
- Mix/match with up to two VMIP series instruments in a single VXI slot
Keep Reading
VM8016

16-channel Low Thermal Multiplexer
- Low Thermal Offset Relays, <0.5 mV
- High Insulation Resistance
- Ideal for High-precision Signal Switching with DMMs
- Designed for 2- or 4-wire Switching
- Configured as 2(1x8) 2-wire Multiplexers
- SCPI Compatible
- Message-based Control
Keep Reading

VXI Switching Modules

Instruments

SHARE