Skip to content

EX1200 Switches

  • EX1200-2001
    EX1200-2001 – 20-Channel 16 Amp Form A (SPST) Switch

    20 Channel 16 Amp Form A (SPST) Switch



    • Large switching capacity in a small footprint
    • Switch up to 16 A current - highest in its class
    • High breakdown voltage (1,000 V RMS between open contacts)
    • Ideal for switching AC or DC power supplies and current sources
    • Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state

    Keep Reading
  • EX1200-2002
    EX1200-2002 – 12-Channel 16 Amp Form C (SPDT) Switch

    12 Channel 16 Amp Form C (SPDT) Switch



    • Large switching capacity in a small footprint
    • Switch up to 16 A current - highest in its class
    • High breakdown voltage (1,000 V rms between open contacts)
    • Ideal for switching AC or DC power supplies and current sources
    • Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state

    Keep Reading
  • EX1200-2007A
    EX1200-2007A – 48-Channel 1000V Multiplexer

    48-Channel 1000V Multiplexer



    • Highest density module in its class for ability to switch signals up to 1000 V DC (up to 144 two-wire channels in 1U footprint)
    • Built-in configuration relays expand the individual building blocks
    • Ideal for hipot, cable breakdown, source measure unit and power supply switching
    • Extensive signal shielding employed on-board for excellent signal fidelity
    • Fail-safe interrupts can detect fault conditions and automatically open up relays to a default state

    Keep Reading
  • EX1200-2008H
    EX1200-2008H – 30-Channel 3 (1 x 10) High-Voltage Multiplexer

    30-Channel 3 (1 x 10) High-Voltage Multiplexer



    • High-density, high-voltage multiplexer/scanner  (1x180 in 1U size)
    • Ideal for hipot, cable breakdown, source measure unit and power supply switching
    • Extensive signal shielding employed on-board for excellent signal fidelity
    • Break-before-make (BBM) and make-before-break (MBB) accomplished in hardware, considerably improving scanning time
    • Fail-safe interrupts can detect fault conditions and automatically open up relays to a default state

    Keep Reading
  • EX1200-2087A
    EX1200-2087A - 8 (1 X 2) 2-Wire, 1000VDC MUX w/ Built-In Failsafe Monitoring

    8 (1x2) 2-wire, 1000 VDC Multiplexer with Built-in Failsafe Monitoring



    • Built in Self-Test to verify health of relays and  isolate failures
    • Switch signals up to 1000 VDC
    • Extensive signal shielding employed on-board for excellent signal fidelity
    • Ideal for applications where high-reliability is required and cost of failure is high. Example: PDU switching, aircraft power bus switching

    Keep Reading
  • EX1200-3001
    EX1200-3001 and EX1200-3001DS - (8) 1 X 8, 2-Wire 300V 2A Multiplexer

    8 (1x8) 2-wire multiplexer, 300V/2A



    • High-density multiplexing/scanning (up to 384 two-wire channels in a 1U footprint)
    • Configure as 1-, 2-, or 4-wire multiplexers under program control
    • Supports thermocouple, RTD, and thermistor measurements with optional terminal block
    • On-board scanning greatly reduces overall test execution time
    • 300 V/2 A
    • 60 W, 125 VA
    • More than 100 MHz bandwidth
    • EX1200-3001DS adds discharge relay to bleed stray charge for sensitive measurements

    Keep Reading
  • EX1200-3048
    EX1200-3048 – 48-Channel 400V 2A Multiplexer

    48 Channel, 300V/2A Multiplexer



    • High-density multiplexing/scanning (up to 288 two-wire channels in a 1U footprint)
    • High current bank available for current measurement up to 3 A
    • Two individual (1x24) 2-wire multiplexer banks programmable to form a 1x48 multiplexer
    • Optional screw-terminal junction box includes built-in cold-junction compensation
    • Supports thermocouple, RTD, and thermistor measurements
    • 300 V/2 A
    • 60 W, 125 VA
    • Direct routing to DMM through internal analog measurement bus simplifies field wiring

    Keep Reading
  • EX1200-3048S
    EX1200-3048S – 48-Channel FET Multiplexer

    48 Channel, 250 V FET Multiplexer



    • High-density solid-state multiplexer (up to 288 two-wire channels in a 1U footprint)
    • On/off switching < 500 μs
    • Switch up to 250 VAC / 250 VDC, highest for a solid state switch module in its class
    • Configure as 2- or 4-wire multiplexers
    • Optically isolated design
    • Supports thermocouple, RTD, and thermistor measurements
    • Optional screw-terminal junction box includes built-in cold-junction compensation
    • Direct routing to DMM through internal analog measurement bus simplifies field wiring

    Keep Reading
  • EX1200-3072
    EX1200-3072

    72-Channel 2-Wire, 300 V/2 A Multiplexer



    • High-density 300 V/2 a multiplexing scanning (up to 432 two-wire channels in 1U footprint)
    • Two individual (1x36) 2-wire multiplexer banks programmably combinable to form a 1x72 multiplexer
    • Configure as 2- or 4-wire multiplexers
    • Internal capacitive discharge relays keep high voltages from disturbing sensitive measurement points
    • Supports thermocouple, RTD, and thermistor measurements
    • Optional screw-terminal junction box includes built-in cold-junction compensation
    • Direct routing to DMM through internal analog measurement bus simplifies field wiring

    Keep Reading
  • EX1200-3096
    EX1200-3096 – 96-Channel 100V 0.5A 2-Wire Multiplexer

    96-Channel 2-Wire ,100 V / 0.5 A Multiplexer



    • Ultra high-density multiplexing/scanning (1x576 2-wire channels in full rack mainframe)
    • Two individual (1x48) 2-wire multiplexer banks programmably combinable to form a 1x96 multiplexer
    • Configure as 2- or 4-wire multiplexers
    • Internal capacitive discharge relays keep high voltages from disturbing sensitive measurement points
    • Supports thermocouple, RTD, and thermistor measurements
    • Optional screw-terminal junction box includes built-in cold-junction compensation
    • Direct routing to DMM through internal analog measurement bus simplifies field wiring

    Keep Reading
  • EX1200-3164

    16 (1x4) 2-wire, 300 V/2 A Multiplexer



    • High-density 300 V/2 A multiplexing (up to 384 two-wire channels in 1U footprint)
    • Maximum reconfigurability - 16 (1x4) blocks individually combinable under program control
    • Configure as 2- or 4-wire multiplexers under program control
    • Supports thermocouple, RTD, and thermistor measurements
    • Optional screw-terminal junction box includes built-in cold-junction compensation
    • Direct routing to DMM through internal analog measurement bus simplifies field wiring
    • Stub-breaking relays isolate the module from interfering 

    Keep Reading
  • EX1200-3824

    8 (1x24) Solid State, 100V/100MA Multiplexer



    • 8 Banks of 1x24 One-Wire Multiplexer
    • Solid State Relays for Maximum Switching Speed and Virtually Infinite Life
    • Capable of Switching High Voltage Signals Up to 100 V Peak
    • User Configurable 10:1 Attenuator Option Enables Direct Connections to 10 V Digitizers
    • Up to 48 (1x24) One-Wire Channels in 1U Full Rack Mainframe
    • Front Panel Mountable Break-Out-Box for Easy Wiring
    Applications:
    • Automotive ECU Test
    • Avionics Test
    • Health Monitoring

    Keep Reading
  • EX1200-4003

    Dual 4x16, 2-wire, 300 V/2 A Matrix



    • Configure as (8x16) or (4x32) under program control
    • Switch up to 300 V, 2A - highest at this density in its class
    • Highest-performance matrix in its class - 45 MHz bandwidth, unmatched signal integrity
    • Extensive signal shielding employed on PCBs for excellent signal fidelity
    • Support 4 x 192, or 8 x 96 configurations in a 1U EX1200 mainframe

    Keep Reading
  • EX1200-4128

    4x128, 1-wire, 250 V/1 A Matrix



    • 4x128 1-wire configuration
    • Capable of switching 250 VAC/220 VDC, 1 A - highest in its class at this density
    • Connect rows to internal analog bus to construct larger matrices without external cabling
    • Crosspoint architecture enables multiple testpoints to share instrument I/O
    • Stub-breaking relays increase overall system performance

    Keep Reading
  • EX1200-4264

    Dual 2x32, 2-wire, 300 V/2 A Matrix



    • Configure as (2x64) under program control
    • Switch up to 300 V, 2A - highest at this density in its class
    • Extensive signal shielding employed on PCBs for excellent signal fidelity
    • Columns can be connected to the EX1200’s analog backplane and can use the internal DMM
    • EX1200 series can support 2 x 348, two-wire configurations in a 1U full rack mainframe

    Keep Reading
  • EX1200-4265

    Dual 2x32, 2-wire, 300 V/2 A Matrix with Bypass



    • Configure as (2x64) under program control
    • Bypass configuration makes this ideal for cable harness testing
    • Switch up to 300 V, 2A - highest at this density in its class
    • Extensive signal shielding employed on PCBs for excellent signal fidelity
    • Columns can be connected to the EX1200’s analog backplane and can use the internal DMM
    • EX1200 series can support 2 x 348, two-wire configurations in a 1U full rack mainframe

    Keep Reading
  • EX1200-5001

    80-Channel, 300 V/2 A, Form A (SPST) Switch



    • Can be mixed and matched to create application specific configurations
    • Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
    • Can be used to switch a common point to either power or ground (Form C)
    • Connect together using external wiring for flexible switch design
    • Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

    Keep Reading
  • EX1200-5002

    32-Channel, 300 V/2 A, Form C (SPDT) Switch



    • Can be mixed and matched to create application specific configurations
    • Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
    • Can be used to switch a common point to either power or ground (Form C)
    • Connect together using external wiring for flexible switch design
    • Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

    Keep Reading
  • EX1200-5004

    32 Channel, 5 A, Form C (SPDT) Switch



    • Ideal for hot switching general purpose signals up to 5 A
    • Fail-safe interrupt forces relays open in case of external fault condition
    • Integral shield attenuates noise and crosstalk between adjacent channels/modules
    • Up to 192 individual SPDT relays in a 1U full-rack mainframe
    • IVI Switch compliant drivers facilitate path level commands to simplify programming

    Keep Reading
  • EX1200-5006

    40-Channel, 300 V/2 A, Form A (SPST) Switch



    • Can be mixed and matched to create application specific configurations
    • Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
    • Can be used to switch a common point to either power or ground (Form C)
    • Connect together using external wiring for flexible switch design
    • Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

    Keep Reading
  • EX1200-5007

    12-Channel, 300 V/2 A, Form C (SPDT) Switch



    • Can be mixed and matched to create application specific configurations
    • Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
    • Can be used to switch a common point to either power or ground (Form C)
    • Connect together using external wiring for flexible switch design
    • Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

    Keep Reading
  • EX1200-6101

    10 Channel SP4T, 1.3 GHz Coaxial Switch, 50 Ω



    • Highest density RF switches and matrices
    • 50 W maximum switching power
    • Can be mixed and matched to create application specific configurations
    • Ideal for general purpose RF switching with high signal fidelity and total system bandwidths > 1 GHz
    • No unterminated stub effects
    • Excellent crosstalk and isolation specifications

    Keep Reading
  • EX1200-6102

    17 Channel (1x2), 1.3 GHz Coaxial Switch, 50 Ω



    • Highest density RF switches and matrices
    • 50 W maximum switching power
    • Can be mixed and matched to create application specific configurations
    • Ideal for general purpose RF switching with high signal fidelity and total system bandwidths > 1 GHz
    • No unterminated stub effects
    • Excellent crosstalk and isolation specifications

    Keep Reading
  • EX1200-6111

    5 Channel SP4T, 1.3 GHz Coaxial Switch, 50 Ω



    • 5 Channel, 1.3 GHz, RF Switch
    • 50 W maximum switching power
    • Can be mixed and matched to create application specific configurations
    • Ideal for general purpose RF switching with high signal fidelity and total system bandwidths > 1 GHz
    • No unterminated stub effects
    • Excellent crosstalk and isolation specifications

    Keep Reading
  • EX1200-6216

    Dual (1x16), 1 GHz RF Multiplexer, 50 Ω



    • Highest density RF switches and matrices
    • 50 W maximum switching power
    • Suitable for switching RF signals to/from high bandwidth measurement devices such as oscilloscopes and function generators
    • Can be mixed and matched to create application specific configurations
    • Coax shields are isolated from system ground to minimize ground loop effects
    • No unterminated stub effects

    Keep Reading
  • EX1200-6216HV

    Dual (1x16), 250 MHz, 500 V Multiplexer



    • Greater than 250 MHz bandwidth
    • Very high-density (two 1x16 muxes)
    • 500 V switching capability
    • Ideal for differential coaxial switching
    • Star configurations allow any channel to be connected to any other channel

    Keep Reading
  • EX1200-6301

    4 Channel SP4T, RF Multiplexer, 50 Ω, 3 GHz



    • Up to four SP4T RF multiplexer trees, > 3 GHz bandwidth
    • Suitable for switching RF signals to/from high bandwidth measurement devices such as oscilloscopes and function generators
    • 50 W maximum switching power
    • 50 Ω on-board self-termination option (EX1200-6301T)
    • SMB male connectors for high performance
    • No unterminated stub effects

    Keep Reading
  • EX1200-6301T

    4 Channel SP4T, RF Multiplexer, 50 Ω, 3 GHz, Self-terminated



    • Up to four SP4T RF multiplexer trees, > 3 GHz bandwidth
    • Suitable for switching RF signals to/from high bandwidth measurement devices such as oscilloscopes and function generators
    • 50 W maximum switching power
    • 50 Ω on-board self-termination option (EX1200-6301T)
    • SMB male connectors for high performance
    • No unterminated stub effects

    Keep Reading
  • EX1200-7100

    DC-26 GHz Microwave Switch Carrier and Relay Driver



    • Switch signals from Dc to 26.5 GHz
    • Up to 9 (1 x 6) in only 1U rack size
    • Building blocks range from dual SPDT relays to SP6T relays, transfer switches and relay drivers
    • Microwave building blocks are “pluggable” from the front
    • Mix and match with any other eX1200 plug-in modules
    • Competitively priced modules to suit for OEM/system integration market

    Keep Reading