EX1200 Instruments

  • EX1200-2165

    Full Featured, Tightly Integrated 6.5 Digit DMM for 1U EX1200 Mainframes



    • Modular 6.5 digit DMM for 1U EX1200 mainframes (EX1206A and EX1202A)
    • Tightly integrated into mainframes, allowing high-speed, synchronized scanning measurements without the need for external cabling.
    • Input can be routed directly to the DMM or through an internal analog bus on the backplane
    • Superfast scanning with no processor intervention required
    • Scanning configuration can be saved in the DMM’s non-volatile memory allowing quick recall of saved states
    • Integrating ADC for with adjustable integration time depending on the level of accuracy required
    • “True RMS” AC readings
    • Supports frequency and temperature (thermocouple, RTD and thermistor) measurements

    Keep Reading
  • EX1200-2365

    Full Featured, Tightly Integrated 6.5 Digit DMM for 3U EX1200 Mainframe



    • Modular 6.5 digit DMM for 3U EX1200 mainframes (EX1208A)
    • Tightly integrated into mainframe, allowing high-speed, synchronized scanning measurements without the need for external cabling.
    • Input can be routed directly to the DMM or through an internal analog bus on the backplane
    • Superfast scanning with no processor intervention required
    • Scanning configuration can be saved in the DMM’s non-volatile memory allowing quick recall of saved states
    • Integrating ADC with adjustable integration time depending on the level of accuracy required
    • “True RMS” AC readings
    • Supports frequency and temperature (thermocouple, RTD and thermistor) measurements

    Keep Reading
  • EX1200-7500

    64 -Channel, 2 MHz, Digital I/O



    • Eight ports of 8 I/O bits each
    • High current capability for control of external relays, 300 mA sink
    • Simulate and receive digital data at up to 2 MHz sample rates
    • Selectable output voltages range from 3.3 V to 60 V
    • Setup outputs and scan inputs as part of EX1200 measurement sequencing engine

    Keep Reading
  • EX1200-1538

    Multifunction I/O Card with Enhanced Electronic Counter



    • 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
    • Single frequency measurement range that works from 0.05 Hz to 1 MHz
    • Very stable TCXO base clock, 50 MHz ±1 ppm
    • 195 kΩ Input impedance with selectable coupling (AC/DC)
    • Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
    • Programmable threshold and hysteresis levels with 1 mV resolution
    • Support for quadrature encoder
    • Isolated DIO channels with up to 60 V compliance
    • Isolated and independent 16-bit DAC channels, configurable for voltage or current output

    Keep Reading
  • EX1200-3604

    4 Channel, 500 kSa/s DAC/AWG



    • 4 independent, isolated 16-bit D/A converters per instrument
    • Ideal for simulating thermocouples and other sensor outputs
    • ± 1, 2, 5, 10 and 20 V output ranges
    • ±20 mA, ±10 mA, ±5 mA output ranges
    • Isolated channels can be connected in series to extend output range to 160 V or in parallel to achieve 160 mA
    • 500 kSa/s arbitrary waveform generation with internal programmable clock
    • Extensive triggering capability
    • Synchronize level changes with input measurements to facilitate test sequencing
    • Sense lines for every channel to compensate for cable loss and ensure highly accurate output

    Keep Reading
  • EX1200-3608

    8 Channel, 500 kSa/s DAC/AWG



    • 8 independent, isolated 16-bit D/A converters per instrument
    • Ideal for simulating thermocouples and other sensor outputs
    • ± 1, 2, 5, 10 and 20 V output ranges
    • ±20 mA, ±10 mA, ±5 mA output ranges
    • Isolated channels can be connected in series to extend output range to 160 V or in parallel to achieve 160 mA
    • 500 kSa/s arbitrary waveform generation with internal programmable clock
    • Extensive triggering capability
    • Synchronize level changes with input measurements to facilitate test sequencing
    • Sense lines for every channel to compensate for cable loss and ensure highly accurate output

    Keep Reading
  • EX1200-7416

    16 Channel Comparator/Event Detector



    • Up to 96 differential channels per full rack mainframe
    • Constantly monitor input signals for fault conditions
    • Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
    • Inputs can be masked, inverted, and combined to produce interrupts
    • Can be used as a time stamp module and as a digital I/O
    • Programmable debounce circuitry prevents erroneous readings
    • 10 V and 100 V input ranges
    • On-board memory stores events with IEEE 1588 timestamps
    • Synchronize reading of input states with other scanned analog channels

    Keep Reading
  • EX1200-7600

    5W Programmable Resistor Ladder



    • Ideal for UUT loading or simulation
    • Wide resistance range from 0.5 Ω to 1.5 MΩ
    • 0.1 Ω step size
    • Over-voltage, over-current, and over-temperature sensing protects unit under test
    • External voltage and current sense for monitoring built-in

    Keep Reading
  • EX1200-7008

    Multichannel Glitch-free Universal RTD Simulator



    • Eight channel, universal, 2-/4-wire RTD simulator
    • Fast, monotonic, glitch-free resistance value programming
    • Suitable for simulating resistors, platinum/copper/nickel RTDs
    • Suitable for pulsed and continuous excitation inputs
    • Direct temperature value programming
    • Extensive triggering capability
    • Synchronize level changes with input measurements to facilitate test sequencing

    Keep Reading