EX1200 Switching Family (LXI)

EX1200 Mainframes

EX1200-2001

20 Channel 16 Amp Form A (SPST) Switch

• Large switching capacity in a small footprint
• Switch up to 16 A current - highest in its class
• High breakdown voltage (1,000 V RMS between open contacts)
• Ideal for switching AC or DC power supplies and current sources
• Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state

EX1200-2002

12 Channel 16 Amp Form C (SPDT) Switch

• Large switching capacity in a small footprint
• Switch up to 16 A current - highest in its class
• High breakdown voltage (1,000 V rms between open contacts)
• Ideal for switching AC or DC power supplies and current sources
• Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state

EX1200-2007A

48-Channel 1000V Multiplexer

• Highest density module in its class for ability to switch signals up to 1000 V DC (up to 144 two-wire channels in 1U footprint)
• Built-in configuration relays expand the individual building blocks
• Ideal for hipot, cable breakdown, source measure unit and power supply switching
• Extensive signal shielding employed on-board for excellent signal fidelity
• Fail-safe interrupts can detect fault conditions and automatically open up relays to a default state

EX1200-2008H

30-Channel 3 (1 x 10) High-Voltage Multiplexer

• High-density, high-voltage multiplexer/scanner  (1x180 in 1U size)
• Ideal for hipot, cable breakdown, source measure unit and power supply switching
• Extensive signal shielding employed on-board for excellent signal fidelity
• Break-before-make (BBM) and make-before-break (MBB) accomplished in hardware, considerably improving scanning time
• Fail-safe interrupts can detect fault conditions and automatically open up relays to a default state

EX1200-2087A

8 (1x2) 2-wire, 1000 VDC Multiplexer with Built-in Failsafe Monitoring

• Built in Self-Test to verify health of relays and  isolate failures
• Switch signals up to 1000 VDC
• Extensive signal shielding employed on-board for excellent signal fidelity
• Ideal for applications where high-reliability is required and cost of failure is high. Example: PDU switching, aircraft power bus switching

EX1200-3001

8 (1x8) 2-wire multiplexer, 300V/2A

• High-density multiplexing/scanning (up to 384 two-wire channels in a 1U footprint)
• Configure as 1-, 2-, or 4-wire multiplexers under program control
• Supports thermocouple, RTD, and thermistor measurements with optional terminal block
• On-board scanning greatly reduces overall test execution time
• 300 V/2 A
• 60 W, 125 VA
• More than 100 MHz bandwidth
• EX1200-3001DS adds discharge relay to bleed stray charge for sensitive measurements

EX1200-3048

48 Channel, 300V/2A Multiplexer

• High-density multiplexing/scanning (up to 288 two-wire channels in a 1U footprint)
• High current bank available for current measurement up to 3 A
• Two individual (1x24) 2-wire multiplexer banks programmable to form a 1x48 multiplexer
• Optional screw-terminal junction box includes built-in cold-junction compensation
• Supports thermocouple, RTD, and thermistor measurements
• 300 V/2 A
• 60 W, 125 VA
• Direct routing to DMM through internal analog measurement bus simplifies field wiring

EX1200-3048S

48 Channel, 250 V FET Multiplexer

• High-density solid-state multiplexer (up to 288 two-wire channels in a 1U footprint)
• On/off switching < 500 μs
• Switch up to 250 VAC / 250 VDC, highest for a solid state switch module in its class
• Configure as 2- or 4-wire multiplexers
• Optically isolated design
• Supports thermocouple, RTD, and thermistor measurements
• Optional screw-terminal junction box includes built-in cold-junction compensation
• Direct routing to DMM through internal analog measurement bus simplifies field wiring

EX1200-3072

• High-density 300 V/2 a multiplexing scanning (up to 432 two-wire channels in 1U footprint)
• Two individual (1x36) 2-wire multiplexer banks programmably combinable to form a 1x72 multiplexer
• Configure as 2- or 4-wire multiplexers
• Internal capacitive discharge relays keep high voltages from disturbing sensitive measurement points
• Supports thermocouple, RTD, and thermistor measurements
• Optional screw-terminal junction box includes built-in cold-junction compensation
• Direct routing to DMM through internal analog measurement bus simplifies field wiring

EX1200-3072

72-Channel 2-Wire, 300 V/2 A Multiplexer

• High-density 300 V/2 a multiplexing scanning (up to 432 two-wire channels in 1U footprint)
• Two individual (1x36) 2-wire multiplexer banks programmably combinable to form a 1x72 multiplexer
• Configure as 2- or 4-wire multiplexers
• Internal capacitive discharge relays keep high voltages from disturbing sensitive measurement points
• Supports thermocouple, RTD, and thermistor measurements
• Optional screw-terminal junction box includes built-in cold-junction compensation
• Direct routing to DMM through internal analog measurement bus simplifies field wiring

EX1200-3096

96-Channel 2-Wire ,100 V / 0.5 A Multiplexer

• Ultra high-density multiplexing/scanning (1x576 2-wire channels in full rack mainframe)
• Two individual (1x48) 2-wire multiplexer banks programmably combinable to form a 1x96 multiplexer
• Configure as 2- or 4-wire multiplexers
• Internal capacitive discharge relays keep high voltages from disturbing sensitive measurement points
• Supports thermocouple, RTD, and thermistor measurements
• Optional screw-terminal junction box includes built-in cold-junction compensation
• Direct routing to DMM through internal analog measurement bus simplifies field wiring

EX1200-3164

16 (1x4) 2-wire, 300 V/2 A Multiplexer

• High-density 300 V/2 A multiplexing (up to 384 two-wire channels in 1U footprint)
• Maximum reconfigurability - 16 (1x4) blocks individually combinable under program control
• Configure as 2- or 4-wire multiplexers under program control
• Supports thermocouple, RTD, and thermistor measurements
• Optional screw-terminal junction box includes built-in cold-junction compensation
• Direct routing to DMM through internal analog measurement bus simplifies field wiring
• Stub-breaking relays isolate the module from interfering 

EX1200-3824

8 (1x24) Solid State, 100V/100MA Multiplexer

• 8 Banks of 1x24 One-Wire Multiplexer
• Solid State Relays for Maximum Switching Speed and Virtually Infinite Life
• Capable of Switching High Voltage Signals Up to 100 V Peak
• User Configurable 10:1 Attenuator Option Enables Direct Connections to 10 V Digitizers
• Up to 48 (1x24) One-Wire Channels in 1U Full Rack Mainframe
• Front Panel Mountable Break-Out-Box for Easy Wiring

• Automotive ECU Test
• Avionics Test
• Health Monitoring

EX1200-4003

Dual 4x16, 2-wire, 300 V/2 A Matrix

• Configure as (8x16) or (4x32) under program control
• Switch up to 300 V, 2A - highest at this density in its class
• Highest-performance matrix in its class - 45 MHz bandwidth, unmatched signal integrity
• Extensive signal shielding employed on PCBs for excellent signal fidelity
• Support 4 x 192, or 8 x 96 configurations in a 1U EX1200 mainframe

EX1200-4128

4x128, 1-wire, 250 V/1 A Matrix

• 4x128 1-wire configuration
• Capable of switching 250 VAC/220 VDC, 1 A - highest in its class at this density
• Connect rows to internal analog bus to construct larger matrices without external cabling
• Crosspoint architecture enables multiple testpoints to share instrument I/O
• Stub-breaking relays increase overall system performance

EX1200-4264

Dual 2x32, 2-wire, 300 V/2 A Matrix

• Configure as (2x64) under program control
• Switch up to 300 V, 2A - highest at this density in its class
• Extensive signal shielding employed on PCBs for excellent signal fidelity
• Columns can be connected to the EX1200’s analog backplane and can use the internal DMM
• EX1200 series can support 2 x 348, two-wire configurations in a 1U full rack mainframe

EX1200-4265

Dual 2x32, 2-wire, 300 V/2 A Matrix with Bypass

• Configure as (2x64) under program control
• Bypass configuration makes this ideal for cable harness testing
• Switch up to 300 V, 2A - highest at this density in its class
• Extensive signal shielding employed on PCBs for excellent signal fidelity
• Columns can be connected to the EX1200’s analog backplane and can use the internal DMM
• EX1200 series can support 2 x 348, two-wire configurations in a 1U full rack mainframe

EX1200-5001

80-Channel, 300 V/2 A, Form A (SPST) Switch

• Can be mixed and matched to create application specific configurations
• Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
• Can be used to switch a common point to either power or ground (Form C)
• Connect together using external wiring for flexible switch design
• Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

EX1200-5002

32-Channel, 300 V/2 A, Form C (SPDT) Switch

• Can be mixed and matched to create application specific configurations
• Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
• Can be used to switch a common point to either power or ground (Form C)
• Connect together using external wiring for flexible switch design
• Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

EX1200-5004

32 Channel, 5 A, Form C (SPDT) Switch

• Ideal for hot switching general purpose signals up to 5 A
• Fail-safe interrupt forces relays open in case of external fault condition
• Integral shield attenuates noise and crosstalk between adjacent channels/modules
• Up to 192 individual SPDT relays in a 1U full-rack mainframe
• IVI Switch compliant drivers facilitate path level commands to simplify programming

EX1200-5006

40-Channel, 300 V/2 A, Form A (SPST) Switch

• Can be mixed and matched to create application specific configurations
• Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
• Can be used to switch a common point to either power or ground (Form C)
• Connect together using external wiring for flexible switch design
• Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

EX1200-5007

12-Channel, 300 V/2 A, Form C (SPDT) Switch

• Can be mixed and matched to create application specific configurations
• Ideal for general purpose switching of up to 300 V (AC/DC) or 2 A
• Can be used to switch a common point to either power or ground (Form C)
• Connect together using external wiring for flexible switch design
• Easy to use configuration software facilitates end-to-end path-level switching for simplified programming

EX1200-6101

10 Channel SP4T, 1.3 GHz Coaxial Switch, 50 Ω

• Highest density RF switches and matrices
• 50 W maximum switching power
• Can be mixed and matched to create application specific configurations
• Ideal for general purpose RF switching with high signal fidelity and total system bandwidths > 1 GHz
• No unterminated stub effects
• Excellent crosstalk and isolation specifications

EX1200-6102

17 Channel (1x2), 1.3 GHz Coaxial Switch, 50 Ω

• Highest density RF switches and matrices
• 50 W maximum switching power
• Can be mixed and matched to create application specific configurations
• Ideal for general purpose RF switching with high signal fidelity and total system bandwidths > 1 GHz
• No unterminated stub effects
• Excellent crosstalk and isolation specifications

EX1200-6111

5 Channel SP4T, 1.3 GHz Coaxial Switch, 50 Ω

• 5 Channel, 1.3 GHz, RF Switch
• 50 W maximum switching power
• Can be mixed and matched to create application specific configurations
• Ideal for general purpose RF switching with high signal fidelity and total system bandwidths > 1 GHz
• No unterminated stub effects
• Excellent crosstalk and isolation specifications

EX1200-6216

Dual (1x16), 1 GHz RF Multiplexer, 50 Ω

• Highest density RF switches and matrices
• 50 W maximum switching power
• Suitable for switching RF signals to/from high bandwidth measurement devices such as oscilloscopes and function generators
• Can be mixed and matched to create application specific configurations
• Coax shields are isolated from system ground to minimize ground loop effects
• No unterminated stub effects

EX1200-6216HV

Dual (1x16), 250 MHz, 500 V Multiplexer

• Greater than 250 MHz bandwidth
• Very high-density (two 1x16 muxes)
• 500 V switching capability
• Ideal for differential coaxial switching
• Star configurations allow any channel to be connected to any other channel

EX1200-6301

4 Channel SP4T, RF Multiplexer, 50 Ω, 3 GHz

• Up to four SP4T RF multiplexer trees, > 3 GHz bandwidth
• Suitable for switching RF signals to/from high bandwidth measurement devices such as oscilloscopes and function generators
• 50 W maximum switching power
• 50 Ω on-board self-termination option (EX1200-6301T)
• SMB male connectors for high performance
• No unterminated stub effects

EX1200-6301T

4 Channel SP4T, RF Multiplexer, 50 Ω, 3 GHz, Self-terminated

• Up to four SP4T RF multiplexer trees, > 3 GHz bandwidth
• Suitable for switching RF signals to/from high bandwidth measurement devices such as oscilloscopes and function generators
• 50 W maximum switching power
• 50 Ω on-board self-termination option (EX1200-6301T)
• SMB male connectors for high performance
• No unterminated stub effects

EX1200-7100

DC-26 GHz Microwave Switch Carrier and Relay Driver

• Switch signals from Dc to 26.5 GHz
• Up to 9 (1 x 6) in only 1U rack size
• Building blocks range from dual SPDT relays to SP6T relays, transfer switches and relay drivers
• Microwave building blocks are “pluggable” from the front
• Mix and match with any other eX1200 plug-in modules
• Competitively priced modules to suit for OEM/system integration market